-
Polymer strontiu_titanate ScanningThermalMicroscopy Wafer NUS_NNI_Nanocore PFM SurfaceChange Ni-FeAlloy ScratchMode MolecularSelfAssembly Liquid temp Piezoresponse IndiumTinOxide Vacuum ForceVolumeImage DomainSwitching StainlessSteel HDD DeoxyribonucleicAcid Cobalt AmplitudeModulation frequency_modulation PtfeFilter LateralForce Sidewall SurfaceOxidation LightEmiting Polyethylene GaN Gold Metal-organicComplex StrontiuTitanate ULCA mono_layer
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Polymer blend with nanofiber
Scanning Conditions
- System: NX10
- Scan Mode: Tapping
- Cantilever: AC160TS (k=26N/m, f=300kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 0.5Hz
- Pixel: 512×512
- Scan Mode: Tapping
- Cantilever: AC160TS (k=26N/m, f=300kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 0.5Hz
- Pixel: 512×512