-
Chloroform Vinylpyridine Beads Mobile Hair PyroelectricDetector CalciumHydroxyapatite DiffractiveOpticalElements Polydimethylsiloxane LowDensityPolyethylene DNAProtein small_scan Magnets FailureAnlaysis Aggregated_molecules Flake ScanningIon-ConductanceMicroscopy AAO StyreneBeads Reading Regensburg DeflectionOptics Bismuth Graphite Magnetostrictive PatternedSapphireSubstrat Granada Inorganic CeNSE_IISc Electronics Molybdenum Photovoltaics MultiferroicMaterials NUS BismuthFerrite
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Co coated surface
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm